Skip to main content
Version: 2.19 (deprecated)

Deployments

Helm deployment support is in alpha stage

Pants has experimental support for managing deployments via the experimental-deploy goal. Helm deployments provides with a basic implementation of this goal.

Please share feedback for what you need to use Pants with your Helm deployments by either opening a GitHub issue or joining our Slack!

Motivation​

Helm's ultimate purpose is to simplify the deployment of Kubernetes resources and help in making these reproducible. However it is quite common to deploy the same software application into different kind of environments using slightly different configuration overrides.

This hinders reproducibility since operators end up having a set of configuration files and additional shell scripts that ensure that the Helm command line usued to deploy a piece of software into a given environment is always the same.

Pants solves this problem by providing with the ability to manage the configuration files and the different parameters of a deployment as single unit such that a simple command line as pants experimental-deploy :: will always have the same effect on each of the deployments previously defined.

Defining Helm deployments​

Helm deployments are defined using the helm_deployment target which has a series of fields that can be used to guarantee the reproducibility of the given deployment. helm_deployment targets need to be added by hand as there is no deterministic way of instrospecting your repository to find sources that are specific to Helm:

helm_chart()

There are quite a few things to notice in the previous example:

  • The helm_deployment target requires you to explicitly set the chart field to specify which chart to use.
  • We have three different deployments using different sets of configuration files with the same chart.
  • One of those value files (common-values.yaml) provides with default values that are common to all deployments.
  • Each deployment uses an additional xxx-override.yaml file with values that are specific to the given deployment.

The helm_deployment target has many additional fields including the target kubernetes namespace, adding inline override values (similar to using helm's --set arg) and many others. Please run pants help helm_deployment to see all the posibilities.

Dependencies with docker_image targets​

A Helm deployment will in most cases deploy one or more Docker images into Kubernetes. Furthermore, it's quite likely there is going to be at least a few first party Docker images among those. Pants is capable of analysing the Helm chart being used in a deployment to detect those required first-party Docker images using Pants' target addresses to those Docker images.

To illustrate this, let's imagine the following scenario: Let's say we have a first-party Docker image that we want to deploy into Kubernetes as a Pod resource kind. For achieving this we define the following workspace:

docker_image()
Docker image references VS Pants' target addresses

You should use typical Docker registry addresses in your Helm charts. Because Helm charts are distributable artifacts and may be used with tools other than Pants, you should create your charts such that when that chart is being used, all Docker image addresses are valid references to images in accessible Docker registries. As shown in the example, we recommend that you make the image address value configurable, especially for charts that deploy first-party Docker images. Your chart resources can still use off-the-shelf images published with other means, and in those cases you will also be referencing the Docker image address. Usage of Pants' target addresses is intended for your own first-party images because the image reference of those is not known at the time we create the sources (they are computed later).

With this setup we should be able to run pants dependencies src/deployment and Pants should give the following output:

src/chart
src/docker

This should work with any kind of Kubernetes resource that leads to Docker image being deployed into Kubernetes, such as Deployment, StatefulSet, ReplicaSet, CronJob, etc. Please get in touch with us in case you find Pants was not capable to infer dependencies in any of your helm_deployment targets by either opening a GitHub issue or joining our Slack.

How the Docker image reference is calculated during deployment?

Pants' will rely on the behaviour of the docker_image target when it comes down to generate the final image reference. Since a given image may have more than one valid image reference, Pants will try to use the first one that is not tagged as latest, falling back to latest if none could be found. It's good practice to publish your Docker images using tags other than latest and Pants preferred behaviour is to choose those as this guarantees that the version of the Docker image being deployed is the expected one.

Value files​

It's very common that Helm deployments use a series of files providing with values that customise the given chart. When using deployments that may have more than one YAML file as the source of configuration values, the Helm backend needs to sort the file names in a way that is consistent across different machines, as the order in which those files are passed to the Helm command is relevant. The final order depends on the same order in which those files are specified in the sources field of the helm_deployment target. For example, given the following BUILD file:

src/deployment/BUILD
helm_deployment(name="dev", chart="//src/chart", sources=["first.yaml", "second.yaml", "last.yaml"])

This will result in the Helm command receiving the value files as in that exact order.

If using any glob pattern in the sources field, the plugin will first group the files according to the order in which those glob patterns are listed. In this grouping, files that are resolved by more than one pattern will be part of the most specific group. Then we use alphanumeric ordering for the files that correspond to each of the previous groups. To illustrate this scenario, consider the following list of files:

src/deployment/002-config_maps.yaml
src/deployment/001-services.yaml
src/deployment/first.yaml
src/deployment/dev/daemon_sets.yaml
src/deployment/dev/services-override.yaml
src/deployment/last.yaml

And also the following helm_deployment target definition:

src/deployment/BUILD
helm_deployment(
  name="dev",
  chart="//src/chart",
  sources=["first.yaml", "*.yaml", "dev/*-override.yaml", "dev/*.yaml", "last.yaml"]
)

In this case, the final ordering of the files would be as follows:

src/deployment/first.yaml
src/deployment/001-services.yaml
src/deployment/002-config_maps.yaml
src/deployment/dev/services-override.yaml
src/deployment/dev/daemon_sets.yaml
src/deployment/last.yaml

We believe that this approach gives a very consistent and predictable ordering while at the same time total flexibility to the end user to organise their files as they best fit each particular case of a deployment.

Inline values​

In addition to value files, you can also use inline values in your helm_deployment targets by means of the values field. All inlines values that are set this way will override any entry that may come from value files.

Inline values are defined as a key-value dictionary, like in the following example:

src/deployment/BUILD
helm_deployment(
  name="dev",
  chart="//src/chart",
  values={
    "nameOverride": "my_custom_name",
    "image.pullPolicy": "Always",
  },
)

Using dynamic values​

Pants has support for value interpolation in your BUILD files and you can make use of it when defining some of the values of your helm_deployment. This is not exclusive to the Helm backend but it's illustrated here to showcase how it could be leveraged to inject environment variables into your charts.

Consider the following example:

src/deployment/BUILD
helm_deployment(
  name="dev",
  chart="//src/chart",
  values={
    "configmap.deployedAt": f"{env('DEPLOY_TIME')}",
  },
)

In the previous example, Pants will use the value of the DEPLOY_TIME environment variable in your inline values, which will be then forwarded to your chart. Now you can launch a deployment using the following command:

DEPLOY_TIME=$(date) pants experimental-deploy src/deployment:dev

This isn't restricted to just the values field and it can be used in others like shown in the following example:

src/deployment/BUILD
helm_deployment(
  name="dev",
  chart="//src/chart",
  release=f"{env('ORGANIZATION_ID')}-dev",
  namespace=f"product-{env('NAMESPACE_SUFFIX')}"
)

As shown above, now the release and namespace fields are calculated at deploy-time by Pants and, as in the previous example, they will be forwarded to the Helm chart accordingly.

Ensuring repeatable deployments

You should always favor using static values (or value files) VS dynamic values in your deployments. Using interpolated environment variables in your deployments can render your deployments non-repetable anymore if those values can affect the behaviour of the system deployed, or what gets deployed (i.e. Docker image addresses). Be careful when chossing the values that are going to be calculated dynamically.

Third party chart artifacts​

Previous examples on the usage of the helm_deployment target are all based on the fact that the deployment declares a dependency on a Helm chart that is also part of the same repository. Since charts support having dependencies with other charts in the same repository or with external 3rd party Helm artifacts (declared as helm_artifact), all that dependency resolution is handled for us.

However, helm_deployments are not limited to only first party charts, as it is also possible to declare a deployment having a dependency on a 3rd party Helm artifact instead. As an example, consider the following workspace layout:

helm_artifact(
  name="cert-manager",
  artifact="cert-manager",
  version="v0.7.0",
  repository="https://charts.jetstack.io",
)

In this example, the deployment at src/deploy:main declares a dependency on a 3rd party Helm artifact instead of a chart in the same repository. The only difference in this case when compared to first party charts is that Pants will resolve and fetch the third party artifact automatically. Once the artifact has been resolved, there is no difference to Pants.

Post-renderers​

User-defined Helm post-renderers are supported by the Helm backend by means of the post_renderers field in the helm_deployment target. This field takes addresses to other runnable targets (any target that can be run using pants run [address]) and will build and run those targets as part of experimental-deploy goal. The referenced targets can be either shell commands or custom-made in any of the other languages supported by Pants.

As an example, let's show how we can use the tool vals as a post-renderer and replace all references to secret values stored in HashiCorp Vault by their actual values. The following example is composed of a Helm chart that creates a secret resource in Kubernetes and a Helm deployment that is configured to use vals as a post-renderer:

helm_chart()

In the previous example we define a run_shell_command target that will invoke the vals eval command (vals needs to be installed in the local machine) as part of the Helm post-rendering machinery, which will result on the ref+vault reference being replaced by the actual value stored in Vault at the given path.

Using multiple post-renderers

If more than one target address is given in the post_renderers field, then they will be invoked in the same order given piping the output of one them into the input of the next one.

Deploying​

Continuing with the example in the previous section, we can deploy it into Kubernetes using the command pants experimental-deploy src/deployment. This will trigger the following steps:

  1. Analyse the dependencies of the given deployment.
  2. Build and publish any first-party Docker image and Helm charts that are part of those dependencies.
  3. Post-process the Kubernetes manifests generated by Helm by replacing all references to first-party Docker images by their real final registry destination.
  4. Initiate the deployment of the final Kubernetes resources resulting from the post-processing.

The experimental-deploy goal also supports default Helm pass-through arguments that allow to change the deployment behaviour to be either atomic or a dry-run or even what is the Kubernetes config file (the kubeconfig file) and target context to be used in the deployment.

Please note that the list of valid pass-through arguments has been limited to those that do not alter the reproducibility of the deployment (i.e. --create-namespace is not a valid pass-through argument). Those arguments will have equivalent fields in the helm_deployment target.

For example, to make an atomic deployment into a non-default Kubernetes context you can use a command like the following one:

pants experimental-deploy src/deployments:prod -- --kube-context my-custom-kube-context --atomic
How does Pants authenticate with the Kubernetes cluster?

Short answer is: it doesn't. Pants will invoke Helm under the hood with the appropriate arguments to only perform the deployment. Any authentication steps that may be needed to perform the given deployment have to be done before invoking the experimental-deploy goal. If you are planning to run the deployment procedure from your CI/CD pipelines, ensure that all necessary preliminary steps (including authentication with the cluster) are done before the one that triggers the deployment.